- 关于召开2022年高效低成本铁前新技术研讨会的通知
- 延期召开—2021 年炼铁系统高效、低耗 关键技术研讨会
- 关于召开2021年炼铁系统高效、低耗关键技术研讨会的通知
- 关于延期召开铁前高效低耗 关键技术研讨会的通知
- 关于召开2021 年炼铁系统高效、 低耗关键技术研讨会的通知
- 收获满满!圆满闭幕--2020年全国炼铁、炼钢对标研讨会!
- 大咖云集!隆重召开--2020年全国炼铁、炼钢对标研讨会!
- 凝聚你我力量,共建诚信商家——2020.3.15消费者权益保护活动
- 会议通知--2020年炼铁系统科学合理用料、绿色经济生产技术研讨会
- 国庆节放假通知
- 圆满落幕——2019年智能技术在炼铁上的应用研讨会
- 隆重开幕--2019年智能技术在炼铁上的应用研讨会
孟加拉国进口废钢价格下跌,计划建新钢厂
孟加拉国进口废钢价格下跌,计划建新钢厂
Bangladesh imported scrap prices weaken, new mill planned
Kallanish(开阑商务信息咨询)报道,在斋月的低迷开端之后,孟加拉国废钢市场本周略有好转。虽然整体购买活动仍然疲软,但进口废钢报价较前一周下降了5-7美元/吨。
Bangladesh’s scrap market saw slight improvement this week following a subdued start to Ramadan. While overall buying remains weak, imported scrap offers declined by $5-7/t on the week, notes Kallanish.
原产于澳大利亚的HMS报价为360-363美元/吨cfr吉大港,碎废钢的报价有限。来自菲律宾的GI捆包废钢报价为330-335美元/吨cfr。
Australia-origin HMS was heard at $360-363/t cfr Chattogram, while offers for shredded scrap were limited. GI bundles from the Philippines were priced at $330-335/t cfr.?
达卡一位废钢贸易商告诉Kallanish:“与上周的冷清相比,市场出现一些好转。然而,总体需求依然低迷。螺纹钢生产商也将价格下调了2,000孟加拉塔卡/吨,预计只有在斋月结束后,需求才会出现明显变化。”
“The market showed some improvement compared to last week’s quiet conditions. However, overall demand remains sluggish. Rebar producers have also reduced prices by BDT 2,000/t, and any significant demand shift is expected only after Ramadan ends,” a Dhaka-based scrap trader told Kallanish.?
与此同时,Bashundhara Multi Steel Industries(BMSIL)将于2026年年中在吉大港Mirsarai的国家经济特区开始运营。该厂将拥有世界上最大的单线小型长材轧机。
Meanwhile, Bashundhara Multi Steel Industries (BMSIL) is set to begin operations by mid-2026 at the National Special Economic Zone in Mirsarai, Chattogram. The facility will house the world’s largest single-strand mini mill for long steel products.?
BMSIL的产能为125万吨/年,将成为孟加拉国第一家盘螺和盘条生产商。超过50%的厂区已经开发完毕,并计划在Sandwip海峡修建一个码头,用于原材料进口。
With a capacity of 1.25 million tonnes/year, BMSIL will be Bangladesh’s first producer of rebar coils and wire rods. Over 50% of the site has been developed, with plans to build a jetty on the Sandwip Channel for raw material imports.?
BMSIL订购了一台达涅利MIDA小型轧机,该轧机能够生产超过100万吨/年的螺纹钢和盘条,是全球生产率最高的单线小型轧机。
BMSIL has ordered a Danieli MIDA mini mill, capable of producing over 1 mt/y of rebar and wire rod, making it the most productive single-strand mini mill globally.
- 上一篇 : 加拿大总理宣布对美国进口产品征收25%报复性关税
- 下一篇 : 越南螺纹钢进入利润丰厚的美国市场